find spare parts
APRO Technologie GmbH
Im Hülsenfeld 19
D-40721 Hilden
Phone +49 (0)2103-398 72-0
Fax +49 (0)2103-398 72-11
eMail:
short description of APRO (PDF)
Im Hülsenfeld 19
D-40721 Hilden
Phone +49 (0)2103-398 72-0
Fax +49 (0)2103-398 72-11
eMail:
short description of APRO (PDF)
slot applicator HMC62 for continuous coatings with coat weights above 20 g/m²
APRO slot applicator series HMC62 were designed for continuous applications with high coat weights. The approved control modules HMC51 combined with an optimised slot nozzle design and a highly accurate cross section glue distribution allow coat weights from 20 to 200 g/sqm. These coat weights are needed for manufacturing self adhesive material like tapes or films. This applicator is also used to manufacture textile composites and wooden products.Technical data
operating voltage | 120/240 VAC PNPE |
---|---|
frequency | 50/60 Hz |
sensor | PT100 - NI120 - Fe/Ko - NTC |
temperature range | 20-200 °C |
glue pressure | max. 10MPa (100 bar) |
air pressure | 600 kPa (6 bar) |
coating width | 300 - 1.500 mm |
total width | 500 - 1.700 mm |
coat weight | 20 - 200 g/m² |
Application area:
paper converting industry, film converting, filter industry, textile industry, automotive industryProduct Request Download Datasheet